PRINTING CHEMICAL & PROCESS CHEMICAL FOUNTAIN SOLUTION / ADDITIVE


FOUNTAIN SOLUTION / AQUA STAR TYPE V

OHDEN Aqua Star V is good for CTP plates and a complete alcohol replacement fountain solution combining the most efficient wetting agents with the latest corrosion inhibitors and high viscosity.
It is suitable for high speed sheet-fed and web presses for long run printings with auto water-circulation system. Apply 1.5～2% maximum.

Spec. & Packing Supplied in 10L bottle & 20L bottle or 200L drum

Performance result under condition of:
- Water temperature at the press: 13.5℃
- Water pH: 7.56
- Water Conductivity: 219mS/cm

Resulted as below:
Aqua Star V original pH: 4.16
1.0% mix 5.48pH – 951mS/cm
1.5% mix 5.05pH – 1324mS/cm
2.0% mix 4.83pH – 1688mS/cm

Features & Benefits

No smell – No flash point – No drowsiness, dizziness to mucous membranes – No chilling required –
No evaporation – No alcohol means less dot gain
Surface tension reducers and wetting agents to produce a stable ink/damp emulsion to:
Give quick clean ups – Improve ink transfer – Reduce ink feed and replace the use of alcohol (IPA).

Usage Instructions

The recommended dosing is 2% maximum (20ml per liter). Over dosing causes poor ink/water-emulsion stability leading to over-emulsification of ink on roller train and feed back into dampening system. For accurate dosing

OTHER OPTIONS